Z941TC/ZMD94H4 Electric Cast Stone Gate Valve

1. It is made of high-performance structural ceramics, featuring excellent wear resistance.

2. The cavity design avoids the problem of jamming.

3. The gate plate, valve seat and flow - through parts have a long service life.

4. The self - rotation of the valve plate enables a well - fitting seal between the valve plate and the valve seat and uniform wear of the valve plate.

5. The material opening has a full - flow design without any obstructions, and is equipped with a blockage - blowing device, resulting in less ash jamming and accumulation.

6. It has a compact structure and is easy to install.

YDF-B Dome Valve

1. Flexible and Durable Operation: During opening and closing, the plug of the dome valve maintains a gap of 0.8 - 1.5mm from the special rubber sealing ring. Without direct contact, it ensures low operation resistance and smooth rotation, significantly extending the sealing ring's service life.

2. Superior Sealing Performance: Equipped with a special inflatable rubber sealing ring, the dome valve provides excellent sealing.

3. Scientific Material Selection and Wear Resistance: Adapted to different working conditions, the plug — the core component of the dome valve — is made of suitable wear-resistant materials, offering outstanding abrasion and erosion resistance.

PZ941TC Electric Ceramic Slag Discharge Valve

The PZ941TC electric ceramic slag discharge valve, also known as the ceramic slag discharge gate valve, belongs to the category of ceramic gate valves. The valve body is made of cast steel (such as WCB and CF8), and the lining is made of high-strength toughened engineering ceramics. It is mainly suitable for media such as ore slurry and slag slurry in the metallurgical industry.

YZO644TC Pneumatic Ceramic Valve

This valve is suitable for the dry ash system and bin pump discharge conveying in power plants, as well as for opening and closing pipelines with abrasive dry dust, water, and other media in mines, paper mills, chemical plants, etc. It has a nominal pressure of 1.0 MPa and requires an air source pressure of 0.6 - 0.8 MPa. After closing, it provides complete sealing in all directions. The valve body and bonnet are fabricated by welding WCB cast steel parts and seamless steel pipes, with hard seals used as packing. Featuring excellent sealing, high wear resistance, low starting load, minimal ash jamming and accumulation, this valve offers a long service life.

PZ43TC Ceramic Single Plate Gate Valve

Performance Advantages 1. It uses toughened structural ceramic seals, offering excellent sealing performance and high mechanical strength. 2. It can prevent solid particles from scouring and wearing the sealing surface, featuring good wear resistance. 3. It is suitable for applications in the power industry and dry ash systems where wear conditions are harsh. 4. With a single valve seat and one - way pressure - tight sealing, it can effectively prevent ash and slag accumulation and blockages. 5. The material opening has a full - flow design without any obstructions and is equipped with a blockage - blowing device, resulting in less ash jamming and accumulation. 6. It has a compact structure and can be installed at any angle.

Z644TC Pneumatic Double Gate Ceramic Valve

The pneumatic ceramic double gate valve is widely used in pipelines of coal chemical industry, petrochemical industry, rubber, papermaking, pharmaceuticals, etc. as a device for diverting, combining or switching the flow direction of the medium.The pneumatic ceramic double gate valve adopts a top-mounted structure. Under high-pressure and large-caliber conditions, it reduces the connecting bolts of the valve body itself, enhances the reliability of the valve, and can overcome the influence of the system's own weight on the normal operation of the valve.Nominal diameter: DN50mm - DN300mm (NPS2 - 12).
Nominal pressure: PN10MPa - 16MPa.
Operating temperature range: -29°C - 300°C.